ICS-CERT: Invensys Winderware Intouch 10 DLL Hijack

Tuesday, July 24, 2012

Infosec Island Admin

7fef78c47060974e0b8392e305f0daf0

ICS-CERT originally released Advisory ICSA-12-177-01P on the US-CERT Portal on July 05, 2012. This web page release was delayed to provide the vendor time to contact customers concerning this information.

Independent researcher Carlos Mario Penagos Hollmann has identified an uncontrolled search path element vulnerability, commonly referred to as a dll hijack, in Invensys’s Wonderware InTouch application. Successfully exploiting this vulnerability could lead to arbitrary code execution.

ICS-CERT has coordinated the report with Invensys, which has produced an upgrade to address this vulnerability. Mr. Hollmann has validated that the upgrade resolves the reported vulnerability.

A vulnerability has been discovered in a common dll component used by InTouch and other Wonderware System Platform products. The following Invensys products contain the vulnerable dll and are affected:

• InTouch 2012 and all prior versions

• Wonderware Application Server 2012 and prior versions

• Wonderware Information Server 4.5 and prior versions

• Foxboro Control Software 4.0 and all prior versions

• InFusion CE/FE/SCADA 2.5 and all prior versions

• InBatch 9.5 SP1 and all prior versions, and

• Wonderware Historian 10.0 SP1 and all prior versions

IMPACT

Successful exploitation of this vulnerability may lead to arbitrary code execution.
Impact to individual organizations depends on many factors that are unique to each organization. ICS-CERT recommends that organizations evaluate the impact of this vulnerability based on their operational environment, architecture, and product implementation.

BACKGROUND

The Invensys Wonderware InTouch HMI is used in many industries worldwide, including manufacturing, energy, food and beverage, chemical, and water and wastewater.
The Information Server provides industrial information content including process graphics, trends, and reports. The Invensys Wonderware InTouch HMI Web Client provides access to these reports, analyses, and write back capabilities to processes.

VULNERABILITY OVERVIEW

UNCONTROLLED SEARCH PATH ELEMENT:  InTouch uses an open or uncontrolled search path to find resources, which could allow an unauthorized user to easily locate and exploit one or more locations. An unauthorized user could place a malicious dll in a directory where it could be loaded before the valid dll. An attacker must have access to the host file system to exploit this vulnerability. The exploit is only triggered when a local user runs the vulnerable application and loads a malformed dll file. CVE-2012-3005 has been assigned to this vulnerability. A CVSS v2 Base Score of 6.6 has also been assigned; the CVSS vector string is (AV:L/AC:M/Au:S/C:C/I:C/A:C).

EXPLOITABILITY:  This vulnerability cannot be exploited remotely or without user interaction. The exploit is only triggered when a local user runs the vulnerable application and loads a malformed dll file.

EXISTENCE OF EXPLOIT:  No known public exploits specifically target this vulnerability.

DIFFICULTY:  An attacker with a moderate skill level would be able to exploit this vulnerability.

MITIGATION:

Invensys has provided instructions and a link to the software download that can be found here:

Any machine running one or more of the products listed above is affected and should be patched. No other components of the Wonderware installed products are affected. Install the Security Update using instructions provided in the ReadMe file for the product and component being installed. In general, the user should:

• Read the installation instructions provided with the patch
• Shut down any of the affected software products
• Install the update, and
• Restart the software

The full ICS-CERT advisory can be found here: 

Source:  http://www.us-cert.gov/control_systems/pdf/ICSA-12-177-02.pdf

Possibly Related Articles:
10993
SCADA
Industrial Control Systems
SCADA Application Security Vulnerabilities Exploits ICS-CERT Industrial Control Systems Invensys Wonderware DLL Hijack
Post Rating I Like this!
The views expressed in this post are the opinions of the Infosec Island member that posted this content. Infosec Island is not responsible for the content or messaging of this post.

Unauthorized reproduction of this article (in part or in whole) is prohibited without the express written permission of Infosec Island and the Infosec Island member that posted this content--this includes using our RSS feed for any purpose other than personal use.